PULSE COUNTER

Type: T123

The series of electromechanical pulse counters is especially dsigned for instrumentation.
For heavy-duty operation, versions are available with built-in shock protection to prevent from involuntary counting during transport and when operating under mechanical jolts and vibrations. Typical applications are e.g. piece or coin counting on copyng, vending and bamling machines , filing counting on petrol pumps or event counting on soport gear. These counters are totalizing counters without zero reset. They are available for all common AC and DC voltages.

Mechanical data
Counting Display Digit heght Digit color Housing Operating life Weight Mounting versions	adding withot reset 6 or 7 digit 4mm white on black plastic black 20000000 pulses ca. 150 g different
Electrical data
Operating voltage	24,110,230 V AC + 10% 50 Hz
	6,12,24,48 V DC 10%t
Power consumption Pulse duration Pulse interval Max. counting speed Cycle duration factor Connection	2W - DC / 5 VA - AC 50 ms 50 ms 10 pulses/sec 100% wire leads ca. 300 mm
Ambient conditions
Operating temperature Storage temperature Protection Relative humidity	-5°C ... + 55°C -20°C ... +70°C IP51 max. 80% at +25°C

Resettable pulse counter
Type: TSI64-TSI65

Resettable counter

Type:	TSI64	TSI65
Description:	totalizer with manual reset	mini pulse counter with manual reset
Voltages:	12/24 V DC ± 10% 24/115/230 V AC ± 10%	12/24 V DC ± 10% 24/115/230 V AC ± 10%
Max. count frequency:	25 pulses/sec - V DC 18 pulses/sec - V AC	10 pulses/sec
Min. pulse on time:	24 ms - V DC 22.2 ms - V AC	50 ms
Min. pulse interval:	16 ms - V DC 33.3 ms - V AC	50 ms
Power consumption:	approx. 2W - V DC approx. 2.9 VA - V AC	approx. 0,5 W - V DC approx. 0.75 VA - <= 115 V AC approx. 1.5 VA - 230 V AC
Electrical connection:	silver plated round pins dia. 1.5 mm	150 mm flying leads AWG 22
No. of digits	6	5
Digit height:	2 x 4,5 mm	approx. 1,7 x 4 mm
Colour of figures:	white on black	white on black
Shaft:	stainless steel	stainless steel
Reset:	manual	manual
Housing:	black	dark grey
Front dimension:	53 x 28 mm	48 x 24 mm
Panel cut-out:	50 x 25	45 x 22 mm
Mounting:	panel mount with spring clip fastening	DIN housing for panel mount with clip
Weight:	approx. 83 g	AC 52 g, DC 62 g
Ambient temperature:	- 10 ... +600 C- V DC - 10 ... +550 C - V AC	- 10 ... +500 C
Operating life:	approx. 200 x 106 pulses	aprox. 50 x 106 pulses

PULSE COUNTER

Back