Via Marconi, 14-16
20090 TREZZANO Sul Naviglio (MI) ITALY
Tel. 02 4455138 - 02 48401828 - Fax 02 4453823


OUR PRODUCTS:

TIMERS
- Mechanical timer
- Synchronous timer
- Electronic timer
- Timers accessories
- Programmable timer
- Digital timer
SIGNAL CLOCKS
- Mechanical timer
- Table kitchen timer
- Table digital timer
- Panel digital timer
THERMOSTATS
- Bulb and capillary    thermostat
- Security thermostat
- Bimetal thermostat
- Electronic thermostat
- Room thermostat
RESISTANCES AND THERMOSTATS FOR BOILERS
  - Heating element
  - Anode
  - Boiler thermostat
  - Valves and thermometers
   accessories
THERMOFUSES
THERMOMETERS
- Panel thermometer
- Electronic thermometer
- Bimetal thermometer
- Houseold thermometer
- Bulb and capillary   thermometer
HYGROMETERS,
HYGRO- THERMOMETERS
- Digital
- Panel
- Bimetal hygrometer
WEATHER STATIONS
LAMPHOLDERS FOR OVEN
- Ceramic lampholder
LAMPS FOR OVEN AND FRIDGE
HOT PLATES

FIRE IGNITERS

GASLIGHTERS PIEZOELECTRIC
MOTORS
- Grill motor
- Accessories roasting spit
- Syncronous motor
- Electric motor
AXIAL FANS
SWITCHES, PUSH BUTTONS
- Switch
- Switch for fridge
MICROSWITCHES
ROTARY SWITCHES
LIGHT INDICATORS
PLUG, SOCKET,
FUSEHOLDER
CABLES,
SELFLOCKING CHOCKS
PORCELAIN TERMINALS
HOURCOUNTS
ENERGY REGULATORS
CLOCKS
- Quartz clock movement,   hands
- Fit-up clock
- Digital panel clock
- Wall clock
- Led clocks
- Alarm clock
ALARMS
 

 



Type: "SV20"
 
Temporizzatore Elettronico GENERAL DESCRIPTION::
  • Rated: 220V/16A
  • An AC operated count-down timer
  • Count-down setting is programmable up to 99 min. 59 sec.
  • VDE approved SPST relay is used to drive external appliance
  • Three key operation: "START/STOP", "MIN", "SEC"
  • LED reflects the status of the relay
  • Beep sound is given when count-down finishes
  • Fixing: snap in
  • Hole dimensions: mm. 58x44x44
OPERATING SPECIFICATION:
  • As the unit is powered up, two series of beeps are given
  • '00m00's goes solid in the LCD
  • '00' goes solid in the LCD
  • Press “SEC” once to advance the second section by 1
  • Press and hold “SEC” to advance the second section by 8 steps/second
  • Press “MIN” once to advance the minute section by 1
  • Press and hold “MIN” to advance the minute section by 8 steps/second
  • When there is change in the setting, no matter in second or minute, a beep is given
  • Press “START/STOP” once to starts the count-down process
  • As count-down starts, the LCD updates the coun-down timer every second with the segment “m” and “s” go flashing. The relay together with the LED are turned ON
  • During counting-down, press “START/STOP” one to stop the counting process with the relay and LED are turned off immediatly
  • When count-down finishes, relay and LED are turned off immediatly 30 series of beep are given at 4 beeps per second. Press any key to stop the beep sound
  • When 30 series of beep have been given, the LCD displays the previous setting.


 
Copyright 2003 Infocom Consulting S.r.l.