VIA MARCONI, 15
20090 TREZZANO SUL NAVIGLIO
MILANO ITALY
TEL. +39-02-44.55.138 / +39-02-48.40.18.28
FAX +39-02-44.53.823
e-mail: info@tempomatic.net

TERMOSTATI DI SICUREZZA

Tipo: ST
ST22

 
Protettore termico per motori - termoprotettore a riarmo automatico class="img-responsive" width="500" height="230" border="1">
 
  • TEMPERATURE SETTING RANGE
    (at no load)

    50°C to 150°C in increments of 5°C

  • TOLERANCE
    Indicated temp. ±5°C

  • ON-OFF DIFFERENTIAL TEMP.
    (general)

    30 ±15K

  • HEAT ENDURANCE
    Open temp. +50°C/continuity, 200°/1min

  • CYCLE LIFE(Resistive Load)
    10A/125V AC 10,000 cycles, 7A/250V AC 10,000cycles
    3A/48V DC 6,000 cycles, 2.2A/48V DC 10,000cycles

  • CONTACT CAPACITY
    Min. Current 50mA/ repeatedly,
    Max. Current 30A/5 cycles

  • CONTACT SYSTEM
    Normally closed
  • FEATURE
    - Snap Action
    - Automatic Reset Bimetal
    - Moisture/ Dust-Proof
    - Superior Heat Response
    - PBT Resin Case with Epoxy Seal
    - Customization upon Request
  • APPLICATION
    Overheat protection for Electric Motors, Battery, Chargers, Transformers, Power Supplies, Heating Pads, Fluorescent Ballasts, OAMachines, Solenoids, LED Lighting, etc.
 
clicca sull'immagine per ingrandirla
 
Termostati di sicurezza
clicca sull'immagine per ingrandirla
  • APPROVAL/RATINGS
 
  • LEAD WIRE SPECIFICATION
    • W-Type : UL3266 AWG22 Stranded. Standard Length: 70mm long with 7mm stripped
    • P-Type : ø0.7 Tinned Lead. Standard Length: 25mm * The length can be adjustable on demand.
  • WARNING
    You may happen to encounter counterfeits of SEKI products in the market, all of which cause a serious damage by their serious defectives
    in quality. Therefore it is strongly recommended that you purchase authentic SEKI products from our AUTHORIZED distributors.
 
ST12
 
 
  • TEMPERATURE SETTING RANGE
    (at no load)
    60°C to 150°C in increments of 5°C

  • TOLERANCE
    Indicated temp. ±5°C

  • ON-OFF DIFFERENTIAL TEMP.
    (general)
    30 ±15K

  • HEAT ENDURANCE
    Open temp. +50°C/continuity, 200°C/1min

  • CYCLE LIFE(Resistive Load)
    15A/125V AC 6,000 cycles,
    13A/250V AC 6,000 cycles

  • CONTACT CAPACITY
    Min. Current 100mA/ repeatedly,
    Max. Current 30A/5 cycles

  • CONTACT SYSTEM
    Normally closed
  • FEATURE
    - Snap Action
    - Automatic Reset Bimetal
    - Superior Heat Response
    - Non-Phenolic Insulation
  • APPLICATION
    Overheat protection for Hair Dryer, Electric Fan, Heaters, Popcorn Machines, Electric Ovens, Dish Dryers etc.
   
clicca sull'immagine per ingrandirla
Termoprotettori
 
clicca sull'immagine per ingrandirla
  • APPROVAL/RATINGS
 
  • WARNING
    You may happen to encounter counterfeits of SEKI products in the market, all of which cause a serious damage by their serious defectives in quality. Therefore it is strongly recommended that you purchase authentic SEKI products from our AUTHORIZED distributors.


Tempomatic S.r.l.


Registro delle imprese di Milano n. iscr. P.I. 05955330153
Capitale Versato: euro 10.400,00
Informativa sulla Privacy