chock made of plastic material time resistant. The P1
clamp is a strain relieving passage clamp which can be pressed
into panels of 0.5 - 5.0 mm thickness, clamping range from 5.0
- 11.0 mm, produced of PA 6.6, shall be used inside electrical
devices of thermal class E, their individual units and in permanently
connected appartures, motors, etc...
Especially suited for arched surfaces, e.g. stator housings etc.
- Clamping ranges: 5.0 - 11.0 mm
- For panel thicknesses: 0.5 - 2.5 mm / 2.5 - 5.0 mm
-- (ex stock) PA 6.6 UL94 V2, up to 130°C
-- (upon request) PA 6.6 UL94 V0, up to 100°C
-- PA 4.6 UL94 V2, up to 160°C